This is all of the content. Please be patient as we continue to update this section. We will also have a new feature very soon that will allow every reader to post new articles. We will also have an entire section dedicated to those who want to become editors!

SRT-4 Modification Tutorials

Tutorial
Posted by: Juan Pereda
03/12/08
Difficulty: Intermediate
The installation of an oil flow modifier requires the removal of your valve cover and dropping the oil modifier in place. These instructions will guide you through the process. [More]
Tutorial
Posted by: Juan Pereda
01/28/08
Difficulty: Beginner
There's a few short shifters out there for the SRT-4. Most of them are installed the same way. This tutorial shows you how to install the very popular Maddog Short Shifter. [More]
Tutorial
Posted by: Juan Pereda
01/12/08
Difficulty: Intermediate
Learn how to replace a defective fuel pump or upgrade to a high flow unit in your SRT-4. [More]
Tutorial
Posted by: Juan Pereda
12/26/07
Difficulty: Intermediate
The SRT-4 turbo setup is somewhat different to most cars. It doesn't have an external wastegate, instead a flapper is controlled by a wastegate actuator attached to the turbo/manifold assembly. Learn how to install an aftermarket actuator. [More]
Tutorial
Posted by: Juan Pereda
12/26/07
Difficulty: Beginner
Strut bars are a cost effective and inexpensive way to improve the way your SRT-4 handles. This tutorial shows you how to install a set of Mopar strut bars within a few minutes! [More]
Tutorial
Posted by: Juan Pereda
09/25/07
Difficulty: Advanced
Find out how to remove a stock turbo from your SRT-4 so you can upgrade to a bigger unit and learn a few tips and tricks to make sure your install goes smoothly. [More]
Tutorial
Posted by: Juan Pereda
08/27/07
Difficulty: Beginner
This tutorial will show how to replace your cold pipe with an aftermarket piece, the process is the same for just about any intercooler pipe. [More]
Tutorial
Posted by: Juan Pereda
08/08/07
Difficulty: Beginner
Installing a new front badge on your SRT-4 should take no longer than 5 minutes and can drastically improve your SRT-4's appearance, this tutorial shows you how to accomplish this. [More]
Tutorial
Posted by: Juan Pereda
08/07/07
Difficulty: Intermediate
The Boomba Blow-Off Valve actually replaces the stock surge valve at the same location on the turbo. This guide shows you how to replace the stock surge valve with an aftermarket unit like Boomba's. [More]
Tutorial
Posted by: Juan Pereda
08/07/07
Difficulty: Beginner
Installing a Cold Air Intake on an SRT-4 is pretty much the same for all manufacturers. These simple instructions cover the steps required to install an AFE intake. [More]

SRT-4 Maintenance Guides

Tutorial
Posted by: Juan Pereda
06/11/08
Difficulty: Beginner
Keeping up with your SRT-4's maintenance is the most important part of owning your car. Find out how to do your own oil change! [More]
Tutorial
Posted by: Juan Pereda
10/19/07
Difficulty: Beginner
Being able to stop is just as important as accelerating. So make sure to include new brake pads in your budge and let this guide show you how to install them. [More]

Featured Cars

Tutorial
Posted by: Juan Pereda
07/06/07
At first glance this SXT offers very subtle snail power hints. The SRT-4 intercooler is barely noticeable behind the front grill making this the perfect sleeper. [More]

General Technical Tutorials

Tutorial
Posted by: Juan Pereda
05/27/08
Difficulty: Intermediate
Whether you're restoring an old wheel or just feel like changing the look of your car, read this guide to learn how to paint your wheels. [More]
Tutorial
Posted by: Juan Pereda
07/23/07
This guide explains the general idea behind tire sizes, what all the numbers mean, and how to pick the right dimensions for your car. [More]